Spent the day out in Witheren today levelling out a tank pad for a lovely couple up in the hinterland 👌

Start of the tank pad cut from inside the excavator cab — Setting up the cut into the bank.

Tank pads need to be dead level — even a small slope can put pressure on the base of a poly or steel tank and shorten its life. We cut into the natural bank, set the base out to size, and made sure it was sitting flat before laying the road base.

Kobelco excavator cutting the tank pad into the slope below a tiny home — Cutting into the bank below the tiny home.

Excavator shaping and trimming the tank pad ready for base material — Trimming and shaping the pad before base goes down.

Low-angle view of finished tank pad with compacted road base — Road base in and compacted — sitting nice and flat.

Finished tank pad in Witheren ready for the water tank to be delivered — Finished and ready for the tank delivery.

Heading back out to the same property tomorrow to level out their shed pad as well — nice when you can knock both jobs over in two visits and save the owners a second mobilisation fee.

Need a tank pad or shed pad levelled?

Tank pads, shed pads, container pads, tiny home pads — we cut, level and base them right across the Gold Coast and hinterland. Call John on 0487 193 085 for a quote.

📍 SOLLID Solutions — EARTHWORKS • FABRICATION • SITE PREP

Tank Pad Levelled in Witheren — Shed Pad Tomorrow

Need a quote on your job?

Keep Reading

Crusher Back Up & Running After a Week of Rain